CONSTRUCTION CHEMICAL COMPOUNDS
55.
RAPIDITE
Note:- Rapidite is registered trademark of j.N.Oil & Chemicals(india)
In cold regions of world construction works used to be stopped due to extreme cold wheather conditions. Additives for enhancing cement water reaction where used at some palces but those where costly and beyond common mans economic position which was itself a problem. in order to overcome the problem a compound was introduced which become famous in various regions of world. Various types of rapidite are developed as on todAy,as much as low temperature or freezing and other conditions at a place or region such type of RAPIDITE is used. available in 25ltr, 50 ltr and 220 ltr pack.
a)RAPIDITE 2-IN-ONE COMPOUND(Rapid setting and anti-freeze compound)
b)RAPIDITE 4-IN-ONE COMPOUND(Rapid setting, waterproofing and anti-freeze compound)
58.WATER PROOFING COMPOUND FOR CEMENT:- voids and capillaries are main reasons for leakage , seepage , and penetration of water in the cement concrete, reinforced cement concrete and other cement mortars used in construction of buildings, bridges and other civil structures. In order to eliminate such voids a cement – water reaction friendly additive compound is used which mixes up in motar and the remain of which fills gapes between the concrete thus stops formation of capillaries and stops water penetration from basements , along side walls and from slab roofs.\available in 500ml and 1 ltr pack. MRP Rs……….
 
59.PVC PIPE JOINT CREAME
In order to insert one end of PVC pipe in another one so that both are fixed with each other a creme is applied on both male and female ends of the pipe. Further in order to make the joint sustainable and perfect as well as leake proof the same creame is applied in and around the joint of the creame. When the creame becomes dry it forms a plastic like seal around the joint making it strong and leak proof. Available in 50gm pack. For re-packers traders, bulk suppliers exporters we supply in 50 kg HDP packs.
60.water proofing powder:-
60.SHUTERRING OIL(MOULD RELEASE )
In order to release wooden , steel , and fiber planks and moulds from cement concrete structures easily after hydration of concrete. It is recommended to apply two coats of shuttering oil to the shuttering material so that the concrete does not stick and adhere to the shuttering frames and planks. Available in 50 kg pack.
|
